- Click Advanced Options
![Technicolor Setup - Step 1]()
- Enter a password for your router in the Password field and click Submit.
![Technicolor Setup - Step 2]()
- Click Media Access Gateway
- Click Set up my Media Access Gateway
-
You’ll see the setup screen
-
Enter the details as follows:
Select Routed
Connection Type: VDSL
Router Mode: PPP
PPP Type: PPPoA
User Name: Enter you Wimanx Username EG 20001@vdsl.manxbroaband.com
Password: Enter your Wi Manx password -
Click Next and then Next again. The Advanced Options should appear.
![Technicolor v10 Firmware - Routed IP Setup]()
- On this screen enter the following information:
Tick Public Subnet
Router IP Address: Your Router address (eg, 89.107.0.7, as listed in your Technical Details)
Subnet Bits or Mask: /30 or 255.255.255.252 for a range of 1 IP’s
Gateway Type: Out of Range
NAT Options: NAT DISABLED - Click Apply to complete the advanced configuration.
↧
Setting Up a technicolor in Routed mode.
↧